Locating a Prop for a 115hp Chrysler

[samm835]

This is an early 80s motor, and the motor is no longer being made. I am going to due some maintenance on it over the winter and change out the prop for it. I recently bought the motor, and I am putting it on my 24ft pontoon and I need to change out the prop to a 14X13.....but I did a quick search and I can't find many chrysler props. Again I did a quick search and not a very good one, but thought I would ask...would a Johnson or another motor be an even swap, or anyone want to send me a PM of place to purchase one. Thanks

 

[Frank Acampora]

Re: Locating a Prop for a 115hp Chrysler

1980s Chrysler engines use the same props as early Force engines up to 1994. You may be able to find a 14 inch diameter but most were 13 3/8, commonly called 13. Some Mercury props will fit--most mid range mercs had 15 splines but you need a prop from a small gearcase 90. You can look here on iboats stores for new or ebay for used.