Dave Abrahamson
Lieutenant
- Joined
- May 8, 2003
- Messages
- 1,497
Hey all 1st time poster here in i/o.
My BIL (up in NH, so too far away for me to be of much help except for you guys here on the forums),has a Trophy 2052 cuddy w/ a 4.3 merc that has lost about 6-800 rpm's wot. 45mph down to around 30ish mph.
His mech said to drop from a 19p to a 17p prop, but it has run fine for the last couple years with the 19p. I said to look for another mechanic.
I have never wrenched on an I/O so what are some of the obvious things I sould tell him to look for? Plug wire? Gas filter?Throttle cables? Why would his mechanic want him to change props when the current prop has been operating fine for a couple of seasons?
Sorry to be so long winded, but I told hm if I were able to find help anywhere.....it would be on Iboats.
Thanks guys...he'll be reading this I hope.
Dave
My BIL (up in NH, so too far away for me to be of much help except for you guys here on the forums),has a Trophy 2052 cuddy w/ a 4.3 merc that has lost about 6-800 rpm's wot. 45mph down to around 30ish mph.
His mech said to drop from a 19p to a 17p prop, but it has run fine for the last couple years with the 19p. I said to look for another mechanic.
I have never wrenched on an I/O so what are some of the obvious things I sould tell him to look for? Plug wire? Gas filter?Throttle cables? Why would his mechanic want him to change props when the current prop has been operating fine for a couple of seasons?
Sorry to be so long winded, but I told hm if I were able to find help anywhere.....it would be on Iboats.
Thanks guys...he'll be reading this I hope.
Dave