Loss of speed and another Q

[MercruiserMan]

Re: Loss of speed and another Q

Have you tried adjusting the trim? And I don't mean by where the gauge is pointing if that is what you are doing.
Try trimming up some. If the rpm and speed both goes up,then you were trimmed down to far. When the rpm starts going up and the speed down, that is when you are trimmed up to much and need to trim down a bit.
When you are trimmed down to much, you will have low speed and rpm simply because too much boat is in the water and you are plowing thru the water, not planing on top of it.

I was trimmed up like usual..If I was not trimmed I prolly would have hit 35 mph..