hey every one just got everything put back together on the boat. it's a 97 four winns horizon qx with a Volvo penta 3.0. new exhaust manifold reinstalled carb and riser. It was full of water in the oil pretty big leak in exhaust port from the water line.
so i changed oil and filter put in some mmo and sae 30 for the first run through. right when it hit about 160 started to squeal from what sounds like the water pump. when i was feeling around on the waterlines things are heated up but nothing was burning to the touch was running at 160. When i first tried to start it the motor kicked on but none of the belt were moving. shut it off right away and started to manually turn them and try again. took about 4 tries before they started to move. anyway it hit temp and is making a noise restarted it still made noise loosened alternator belt but that dint help. wondering where some place would be to look or spray a little deep creep whatever any one have any idea what i may have to replace next?
so i changed oil and filter put in some mmo and sae 30 for the first run through. right when it hit about 160 started to squeal from what sounds like the water pump. when i was feeling around on the waterlines things are heated up but nothing was burning to the touch was running at 160. When i first tried to start it the motor kicked on but none of the belt were moving. shut it off right away and started to manually turn them and try again. took about 4 tries before they started to move. anyway it hit temp and is making a noise restarted it still made noise loosened alternator belt but that dint help. wondering where some place would be to look or spray a little deep creep whatever any one have any idea what i may have to replace next?
