Low speed jet location

[jdupree]

I have a 1992 Mercury 200HP Offshore. I think that I might have a piece of trash in a low speed jet. I was trying to figure out where the jet is located? I have a seloc manaual, but unless it is called something different I can't figure out where it is. Thanks.

 

[Laddies]

Re: Low speed jet location

That would be item #3 be sure to keep track of the settings there are 2 on each carb.
http://www.dougrussell.com/partscat...0,330,340,380,170,80,320,200,70,10,210,390,40

 

[jdupree]

Re: Low speed jet location

Thanks! So the idle mixture screw is the low speed jet? Anywhere I can find some good instructions as to how these work, and if I remove them how to make sure I set them back right? Thanks.

 

[Laddies]

Re: Low speed jet location

Before removing the needles just turn them in till they seat gently and keep track of the turns then remove them and spray the passage out with carb cleaner then reinstall the needles to the original postion, if that don't help they (carbs) will have to be removed and cleaned.