Maybe someone can help me out with this

[MAXXIE]

I have a 1985 17' Bayliner bowrider with O/B. I have a real good canvas guy in my area & I want to have at least a bow cover made for it. The snaps are on the boat already, I think they were for the bow cover & there are also snaps along the sides under the flip open center windshield walk through that go to the deck, not sure exactly what those were for. Can a Bayliner bowrider owner that has full canvas for their boat please post up a few picture's with them on so this guy has something to go by? I have yet to go & talk to him about it, but I just want to make sure he's going to make it look right, not just the way he thinks it should be. Thanks for the reply/'s I did "Google" it & really did not come up with much so I thought I might have better results asking here.

 

[Chris1956]

Re: Maybe someone can help me out with this

Maxxie, Those boats were pretty popular. Some marine stores mass produce custom canvas for popular boats, which may be cheaper than custom made. You might check them out. BoatUS is one source.

Did you try the Bayliner web site? They may have pictures.

 

[roscoe]

Re: Maybe someone can help me out with this

& there are also snaps along the sides under the flip open center windshield walk through that go to the deck,



You can get/make a cover piece that snaps in there, to keep the wind from blowing thru like a hurricane,

Have one on my Starcraft. It snaps to the front of both consoles, and to the bottom of the center windshield section.

 

[MAXXIE]

Re: Maybe someone can help me out with this

Chris: I have tried the Bayliner site & they don't go back that far. I'll try that other site.

Rosco: Kool, I couldn't figure out what the hell the snaps were for, that will help with the wind.
I wish all the covers came with my boat. From the amount of snaps on the boat, it looks like it had everything offered.