Merc 400 impeller key and fuel pump

jiveturkey1

Cadet
Joined
Jun 30, 2017
Messages
17
rtl1u9.jpg


Hi, my first post...

I bought my first boat this year, a 1960 Slickcraft 15' runabout with a 1960 Merc 400. I put new seals in the LU but need an impeller key. any idea what parts number that is? Also, does this motor have fuel filter/screen? Can't find it. Thinking about putting a water separator on it. I downloaded the service manual and that was a big help with the LU but can't seem to find those two answers in it.
Thanks!

Oh yeah, anybody know the manufacturer of the trailer?
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Welcome aboard. Nice looking Slickcraft. No guesses on the trailer make.

Is this 2 or 4 cylinder 400? Going by the white motor, guessing a 4 cylinder. Got the serial number handy?

2 and 4 cylinder impeller key is Quicksilver 28-8M0032837.

Both have a screen inside the carb, but the carbs aren't quite the same. A water separator/fuel filter is a good idea.


2 cylinder carb filter/screen, item #14;
carbfilter2.PNG

4 cylinder carb filter/screen, item 21

carbfilter.PNG
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
39,164
It is a good idea to remove bottom half of the magneto to clean / set the breaker points.---gap is 0.008 /0.010"
 

jiveturkey1

Cadet
Joined
Jun 30, 2017
Messages
17
Thanks for the welcome and the replies!

The ser# is 1280136

I'll definitely check the screens, put a water separator on and clean/gapnthe points.

Appreciate it!!
 
Top