TheSeasLife
Petty Officer 2nd Class
Thread starter- Joined
- Aug 23, 2009
- Messages
- 102
My 165 has a 4BRL and we were smelling fuel. I took off spark arrester and when cranking over to start motor the fuel was shooting out of the hole in center of carb. Water Seperators and fuel pump are new. I believe float is stuck. Question is: When I pulled carb off to have it rebuilt I have a bit of water sitting in the manifold. How did it get there? I soaked it up with rags. Can I just pull plugs next and crank it to get water out of cylinders if there is any in them at all?
How can I find out what year my motors are?
How can I find out what year my motors are?
Last edited: