Hi all.
First time post. I have been away from boats for a while but previously was an inboard guy. I recently acquired a 1978 Crestliner 2455 equipped with a Mercruiser 228 with Pre Alpha drive. Certainly a few issues to work through. Item of the moment is trim. I have a 3 button trim switch -- down, up/out and up. Down functions correctly, up / out works properly but the up only button appears to be dead. The batteries are fully charged and appear strong (starts main engine). The pump reservoir is full; no obvious leaks. Fuses (that I have found) seem okay. Hoping someone may have some advice about where to start looking.
Thanks
Aspen31
First time post. I have been away from boats for a while but previously was an inboard guy. I recently acquired a 1978 Crestliner 2455 equipped with a Mercruiser 228 with Pre Alpha drive. Certainly a few issues to work through. Item of the moment is trim. I have a 3 button trim switch -- down, up/out and up. Down functions correctly, up / out works properly but the up only button appears to be dead. The batteries are fully charged and appear strong (starts main engine). The pump reservoir is full; no obvious leaks. Fuses (that I have found) seem okay. Hoping someone may have some advice about where to start looking.
Thanks
Aspen31