Luna_u_fat
Cadet
- Joined
- Jun 30, 2020
- Messages
- 6
I'm restoring a 79 Marquis Ski oat with a Mercruiser 120. The control cables are the last project before I can get it out for a sea trial.
New lower cable, new remote cable. It shifts into forward great, but I'm only getting a little clicking in reverse. (Neutral is fine as well if that matters) I can remove the lower cable and shift into either forward or reverse with no issues. I've watched several YT vids on the correct procedure, including the one with the Engligh guy Chrisa660.
I've done the adjustment procedure 30 times now with basically the same results. I feel like I'm missing something simple. After shifting into reverse and getting the clicking, I can reach and tap the lever over another 1/4 inch and it fully engages.
Any help is appreciated. Thanks
New lower cable, new remote cable. It shifts into forward great, but I'm only getting a little clicking in reverse. (Neutral is fine as well if that matters) I can remove the lower cable and shift into either forward or reverse with no issues. I've watched several YT vids on the correct procedure, including the one with the Engligh guy Chrisa660.
I've done the adjustment procedure 30 times now with basically the same results. I feel like I'm missing something simple. After shifting into reverse and getting the clicking, I can reach and tap the lever over another 1/4 inch and it fully engages.
Any help is appreciated. Thanks