FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
My brother is needing to remove the lower unit on his 02 mercury 25hp remote steer. Other than the bolts, is there anything else that must be disconnected to remove the lower unit?
My brother is needing to remove the lower unit on his 02 mercury 25hp remote steer. Other than the bolts, is there anything else that must be disconnected to remove the lower unit?
the shift linkage for forward and reverse. dont know that model well but i know it will have to be disconnected most of the time it can be disconnected at the lower part of the engine inside the housing. you release it from there and the whole foot slides off with the linkage rod attached. i put my motor in neutral so the foot is in neutral and i will know what position the linkage goes back together in. not hard once ya start im am a tinkerer but im sure others can give better advice IF! they comment? good luck!
