milky cream colored stuff on spark plugs

drillerdan87

Cadet
Joined
Feb 23, 2014
Messages
14
Hey guys please help me, I have a1977 115hp Johnson I just purchased it from a guy I put fresh fuel in it, I made sure my ratio was right started it at the house on the hose and it ran fine it pissis fine stays cool to the touch. So yesterday I take it out on a test run it runs beautiful it's hauling *** then I eez off the throttle so I can turn safely then she dies so I turn it back on it idled then I put it in drive and she dies. I get home and look over it and I notice milky stuff on three of the four spark plugs. What do I do and were do I start. Three of the four cylinders has 110 psi and one has 95 psi
 
Last edited:

HighTrim

Supreme Mariner
Joined
Jun 21, 2007
Messages
10,486
Re: milky cream colored stuff on spark plugs

You either have water in your fuel (is it new?), or water intrusion into the combustion chamber. How is compression?
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Re: milky cream colored stuff on spark plugs

In agreement with High Trim.
 

F_R

Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Re: milky cream colored stuff on spark plugs

+3. Water in cylinders. You must deal with it immediately. The internal parts look at it and think it has been submerged. Rust and destruction started when you shut it off, and continues.
 

Lone Duck

Master Chief Petty Officer
Joined
Oct 17, 2007
Messages
868
Re: milky cream colored stuff on spark plugs

YUP!! All of the above.
 

F_R

Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Re: milky cream colored stuff on spark plugs

Was the tank empty before pumping the new fuel in it? Anyhoo, it is unlikely that that much water from gas got into the cylinders before it quit running, but entirely possible. More likely is a problem in the exhaust cover between the cylinders' vee, letting cooling water squirt into the exhaust ports. Of course it could have blown head gaskets too. But in three of the four cylinders at the same time? Reading between the lines here, I'm betting that motor has been run hot, cooking all the head gaskets and exhaust gaskets. If I'm guessing right, when you get the exhaust covers off you will be able to see if it fried the pistons skirts also. You may have bought a junker. Stuff happens.
 
Top