FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Hello, I have a 1978 70hp Evinrude, when I drained the oil from my lower unit it was a milky color. What could be my problem and if it is run again after replacing oil will it cause any damage to the motor?<br /><br />Thanks in Advance
Im no expert, but i changed my lower unit's oil today, and after sitting for 3+ years, it was also milky. Im sure changing the oil would do it no harm, and would prob. be better for it.
terry,<br /><br />A great percentage of lower unit leaking problems are caused by leaking fill/drain plug screw seals.<br /><br />Drain and refill the L/U and make sure you replace those seals.
Thanks for all the help. I am replacing the fill/drain plug screws and seals. I won't be taking it out though until probably next weekend. I will let you know if it worked.<br /><br />Thanks Again,<br />Terry
Hi, Terry.<br />Read this post. It may be of some help to you.<br /> LowerUnits 101<br /><br />While she is sitting there, place an old board or something under the l/u. You may find a drip of juice, indicating a bad prop seal or vent/fill screw gaskets are leaking.
Thank You for the link, that was a very helpful post. The motor is now running beautifully and am not seeing any indications of further problems.<br /><br />This is a wonderful group!<br /><br />Thanks Again,<br />Terry
