Montgomery Ward 6hp fuel setup?

[AlekMack]

I have a Montgomery Ward registered In (1975) . Basically I’m looking for some guidance on what all I need to get this running . I have a 3/8 hose but wrong quick disconnects
Tank has nothing but a open hole where the fitting goes. New to the outboard hobby

 

[brim_buster]

Goto Walmart get you a new tank. Get a Sierra primer ball. Get about 4 ft of good fuel line. Your probably not gonna find a female quick connect for that motor. Get a fuel filter to put in-line on your hose past the primer ball on the motor side. Take that quick connect off the motor and run fuel line to carb. It might go 3/8 to a 1/4 at the carb. Then you will have to figure out if the motor runs.