FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Next remove both ends of the battery cables at the battery and the motor. Do not forget the ground attached to the block. Clean them with wire brush to shinny metal
Next remove both ends of the battery cables at the battery and the motor. Do not forget the ground attached to the block. Clean them with wire brush to shinny metal
battery post very clean block ground clean had this happen when I changed batterys at home nothing to key switch pulled cables off replaced just like the first time all worked good did nothing different but had power to motor
Well not an OB guy, and would probably get more input in that section.
You said the motor stops, meaning its running fine and without touching anything it shuts down?
Do the gauges say ON, and are there any beeps or other things?