HEy this is a crazy question i dont know if anyone has ever heard of this problem or not i hope someone can help me cause i have done everything i know. I have a 1989 mercury 115,, i have cleaned the carbs and changed the spark plugs i dont know much about boat motors but i have done all the easy stuff lol but what happens is my boat is hard to start first off it takes forever then when i get it started it runs ruff and then it wont take much gas and it wont rev up high when i put it in gear it takes forever to get it going without it dieing and then i cant give it much gas or it will die and spit and sputter but i can trim the motor out of the water and put it in gear and it will spin the prop with all it has got but when i trim it back down in to the water and try to put it in gear and go it dies and will bearly go when i do get it going.. i bet i cant even get over 1mph i dont know what else to do i hope someone can help
Thanks
Dustin
P.S. i have ran sea foam and octane booster in it and i have even changed the gas thinking it was bad gas
Thanks
Dustin
P.S. i have ran sea foam and octane booster in it and i have even changed the gas thinking it was bad gas