About 10 years ago I bought my 1988 23' Wellcraft CC. It had a pair of 1.6L OMC Sea Drives that were in the original factory metalic charcoal grey finish. The motors held up fairly well over the years but the cowls did not. I would get these quarter sized blisters in the paint which I would sand down and go over with a sprey can. It finally got to me and I decided it was time for a repaint.<br /><br />The most time consuming part of the job was the sanding and prep as those of you have done it know. This was followed by a primer and more sanding. The top coat was Western Hi-Glo Synthetic Enamel.<br /><br />I chose to do it in black to confuse the Mercury folks. Here are the results - I hope the pictures are OK as I'm new at posting them.<br /><br />
<br /><br />
<br /><br />
<br /><br />
<br /><br />It took longer than I thought it would but I am pleased with the result.
<br />Jon