motor wont run without choke

trihull59

Seaman Apprentice
Thread starter
Joined
Jul 18, 2010
Messages
46
Hello everyone I am new to the forum and new to boating in general. I just recently picked up a 1959 Tri hull with a 1960s motor I am assuming im not positive on the year i cant find a model number anywhere. But this is my problem. It will not run without choke fully on meaning hardly any air flow to engine. This is what i have done so far, replaced all fuel lines and taken off carbs the carbs actually look really clean
any ideas? the model number on the carb is a KA24A
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Re: motor wont run without choke

Check the fuel pump diaphrams and strip the carbs down and clean them inside....
 

trihull59

Seaman Apprentice
Thread starter
Joined
Jul 18, 2010
Messages
46
Re: motor wont run without choke

found out it is a 1969 50hp merc here is a picture of one of the carbs and the diaphram i think?
 

Attachments

  • image.jpg
    image.jpg
    15.1 KB · Views: 0
  • image 2.jpg
    image 2.jpg
    19.1 KB · Views: 0

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Re: motor wont run without choke

Looking at the outside of the carb is pointless. You need to get IN and clean them....
 
Top