Evinrude Boater
Lieutenant Junior Grade
- Joined
- Jul 6, 2004
- Messages
- 1,144
Re: Muffs or flushing attachment
Evinrookie, Here's my seats installed. I made some panels to close off the area under the splashwell and made the center panel convert into a table. Both seats tip forward for access and storage for the anchor and ski ropes.
If you send me an e-mail I'll send you a good photo of the motor in my avatar. I can't read the installation instructions for the flushing attachment. The finish on my motor looks original but I'm sure somebody has painted it in its 43 year life. I have 320 other photos of this project boat but only some are sized for internet posting.
Evinrookie, Here's my seats installed. I made some panels to close off the area under the splashwell and made the center panel convert into a table. Both seats tip forward for access and storage for the anchor and ski ropes.
If you send me an e-mail I'll send you a good photo of the motor in my avatar. I can't read the installation instructions for the flushing attachment. The finish on my motor looks original but I'm sure somebody has painted it in its 43 year life. I have 320 other photos of this project boat but only some are sized for internet posting.
