Multifunction Tach and Speedo Part Numbers

PCBeach

Cadet
Joined
May 10, 2004
Messages
11
Can someone tell me the correct part number for the Multifunction Tach and Speedo that will work with a 1999 OX66 200HP?

The oil has leaked in the old ones and they are not usable. I pulled them both but can't find the part number listed on them.

I see lots for sale online, but not sure what part numbers will work.

Thanks in advance.
 

yamamarinetech40

Petty Officer 1st Class
Joined
Dec 17, 2006
Messages
328
Re: Multifunction Tach and Speedo Part Numbers

Can't remember the part #, guide is at work, but all you have to know is the prefix...it's an "82" series you need, DO NOT get the new "90" series, will only work with '05 and newer....just look for "82" in number or say '82 series'....i believe 80 series will work also, won't have all functions though...you're in Panama City Beach...I am also.
Good Luck but be very very careful online ordering of these....lots of bad ones out there.
 

PCBeach

Cadet
Joined
May 10, 2004
Messages
11
Re: Multifunction Tach and Speedo Part Numbers

Thanks that helps. I am only going to buy new. Have to replace both of mine this year. My tach has been out for a while and that was not a big deal. Speedo went out at then end of last year. It has the fuel gauge so now I have to open floor access hatch to look at the gauge attached to the tank. Too much of a pain.
 
Top