Need help ID'ing part for 1988 DT200, Driveshaft bushing? Updated!

[R_Andersen]

When I pulled the lower unit on my 1988 DT200 I noticed there is a seal and brass bushing in the lower part of the exhaust leg (intermediate housing?). The bushing goes over the driveshaft directly above the water pump housing. <br /><br />I need to replace this part and I'm having a hard time locating it on the parts diagrams on brownspoint.com. I was wondering if anyone knows the part number or actual name for this part? <br /><br />I was thinking it's part number 45 on this diagram, but I'm not sure since the part I need goes on the driveshaft above the water pump housing.<br /><br /> http://store.brownspoint.com/dt200/fig077-2008797.asp <br /><br /><br />Thanks for any help,<br />Rob

 

[rodbolt]

Re: Need help ID'ing part for 1988 DT200, Driveshaft bushing? Updated!

45 and 46 is what ya need, usually the clip gets destroyed at removal. make sure you clean the bushing pocket. thats what usually kills them. the corrosion builds up and collapses the bushing.

 

[R_Andersen]

Re: Need help ID'ing part for 1988 DT200, Driveshaft bushing? Updated!

Thanks! I have the parts on order.<br /><br />-Rob