Need Help Please

stefffish

Recruit
Joined
Jul 27, 2009
Messages
4
FIRSTLY THANKS TO ALL THOSE WHO HELPED ME POST PICTURES
can anyone tell me the year of the outboard and secondly the model of the carb i think its a twenty no model plate was not there when purchased. then engine will only run on full choke and slighty bogs down and seems to be lacking power. ok at slower speed but still needs full choke. the more the choke is out the better it runs . revs very well in no gear and pumps plenty of water new plugs, petrol filter, fuel line and bulb any ideas people of how to fix this
 

Attachments

  • pic 1.JPG
    pic 1.JPG
    23 KB · Views: 0
  • pic 2.JPG
    pic 2.JPG
    19.1 KB · Views: 0

petryshyn

Commander
Joined
Oct 3, 2001
Messages
2,851
Re: Need Help Please

Is this gasket still in place and in good shape?
 

Attachments

  • pic 2a.jpg
    pic 2a.jpg
    35.3 KB · Views: 0

stefffish

Recruit
Joined
Jul 27, 2009
Messages
4
Re: Need Help Please

yes the speed idle screw washer (i think its and off orange colours) fine and the one that goes in the centre (this one is black) is copmlete but not a tight fit will fall off with float bowl removed seems slightly wavey
 
Top