Need help to ID older Johnson prop

[madgamer]

I have a 1968 Larson All American 15'6" boat with a 1968 Johnson 55 HP 3 cyl engine. I recently spun the old aluminum prop which I want to replace with new but the problem is I am having trouble identifying it. The numbers on the outside read 3198 and the inside hub reads 718 P-J 80
I want the same pitch and size as the old one it worked great before it was spun my WOT reached 5200 RPM and my original motor manual says operating range is 4500 to 5500 rpm's. Thanks for any help

 

[Tim Frank]

Re: Need help to ID older Johnson prop

Can't you get it repaired?
Then you know you have the right size.

 

[F_R]

Re: Need help to ID older Johnson prop

http://www.soderbloom.com/proprepair.html

 

[madgamer]

Re: Need help to ID older Johnson prop

Seems its an old Michigan Wheel Marine 13 and 3/4 15 pitch thanks for the replies I plan on getting it repaired but its in rough shape as it seems to be the original prop that came with the boat