FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Did some looking on my prop today and was only able to find one number: FAC269, does this number represent a size? If so could someone tell me what it is, specifically the pitch. The motor is a 1973 65 hp evinrude. Any information helps. Thanks.
While that number may represent a specific prop, the numbers do not translate directly to diameter and pitch. That is a manufacturers part number. I did a quick yahoo search and turned up nothing. Don't know where on the prop you found this number, but remove the prop nut and check the hub, as you may find diameter and pitch there. FAC269 may also be a rebuilders mark.
look real hard for a number engraved on the base of the prop, inbetween the blades. right where the prop meets the lowerunit casing. That is where my numbers are. it should say something like 17-13 1/4
look real hard for a number engraved on the base of the prop, inbetween the blades. right where the prop meets the lowerunit casing. That is where my numbers are. it should say something like 17-13 1/4
