Need help with vintage part number

[rcpractitioner]

Hi everyone I am new here and stumbled across this forum while trying to learn about my vintage outboard. I was hoping someone out there might be able to help me. The serial number on my motor is 15012-42814, I believe it is a 1953 Evinrude fastwin 15. Please correct me if I am wrong. What I am in desperate need of is the glass sediment bowl that goes on the bottom of the carburetor. I have found a few but without a part number I have no idea if they are the correct one or not short of buying 5 or 6 and hoping 1 fits. If anyone can help steer me in the right direction I would much appreciate it! Thanks!

 

[Don S]

Re: Need help with vintage part number

Moving this over to the Johnson/Evenrude forum. Seems you mistakenly put it in the Merc/Mariner forum.

 

[rcpractitioner]

Re: Need help with vintage part number

Whoops I sure did, my apologies and thank you for moving it where it belongs.

 

[tashasdaddy]

Re: Need help with vintage part number

antique outboard motor club, has a site for vintage parts.

"http://www.aomci.org/"

 

[F_R]

Re: Need help with vintage part number

15012 was built 1953-54. 15hp. Glass bowl is 303121, gasket is 303122.

 

[rcpractitioner]

Re: Need help with vintage part number

15012 was built 1953-54. 15hp. Glass bowl is 303121, gasket is 303122.

Thank you so much!!

 

[samo_ott]

Re: Need help with vintage part number

That raises an interesting point. Are all the glass bowls the same size on the 50's models as they sure look the same but I have never tried to swap em to see.

 

[wbeaton]

Re: Need help with vintage part number

That raises an interesting point. Are all the glass bowls the same size on the 50's models as they sure look the same but I have never tried to swap em to see.

Your particular Fastwin was built in 1954 (s/n 19001+)

The bowls are not the same on all models. I believe the bowls are the same on the 5.5 - 7.5 hp and the 10 - 15 hp. I don't know about the +18 hp, but they are different still.

 

[rcpractitioner]

Re: Need help with vintage part number

Your particular Fastwin was built in 1954 (s/n 19001+)

The bowls are not the same on all models. I believe the bowls are the same on the 5.5 - 7.5 hp and the 10 - 15 hp. I don't know about the +18 hp, but they are different still.

Thanks, I guess we will find out I just ordered the 303121 so lets cross our fingers. I'll admit it looks a bit different from the one I remember the motor having (I lost the original). If anyone else has the definitive answer on the part number I need I would appreciate it. Until then all I can do is wait and try the 303121 when it gets here. Thanks for all the help, love this forum!

 

[wbeaton]

Re: Need help with vintage part number

If anyone else has the definitive answer on the part number I need I would appreciate it.

FR gave you the right numbers. PM me your email address and I'll send you the parts manual for your motor.

 

[rcpractitioner]

Re: Need help with vintage part number

Pm sent to Wbeaton, thanks a ton!!