Need New Control Cables...

[DukesFin]

Here are the controls on the boat for the twin 1995 Johnson 130's:

My controls say Suzuki on them. Stbd. side cables are shot so I want to replace both sets for both motors.

Having never dealt with anything other than OMC Stringer controls, I'm not sure if the control cables should match the throttle/controls or the motors???

What do I get? They will be going on a 24' HyrdaSports WAC if that is any help!

Let me know what other information may be needed in order for me to purchase new control cables.

 

[tashasdaddy]

Re: Need New Control Cables...

there should be a number stamped on the sheath of the cables. this is your replacement number, there are probably different #s on the cable for different lengths seeing you are running twins.

then these guys a can help you. http://www.iboats.com/Johnson_Contr...ategory--**********.691149724--view_id.243425

 

[ezeke]

Re: Need New Control Cables...

Most cables have the identifying part number stamped on the cable shield within two feet of the end. The number will be specific.

 

[DukesFin]

Re: Need New Control Cables...

Thanks!