Need Replacement Access Door For Silverton 402

[coniglioco]

I have a 1996 Silverton 402 and the access door at the stern, port side, for the shore power outlets is cracked. I have been looking everywhere for a parts supplier for this door and have come up empty. It is a unique door being tapered and curved so it is going to be a Silverton specific part. Does anyone have any information on where or how I can possibly get one??? The Silverton parts store in NJ is not currently operating due to restructuring...I think...so that is not an option. Help!!! Very frustrating!

 

[CC245]

Re: Need Replacement Access Door For Silverton 402

E-bay is good for hard to find parts.

 

[Thalasso]

Re: Need Replacement Access Door For Silverton 402

I have a 1996 Silverton 402 and the access door at the stern, port side, for the shore power outlets is cracked. I have been looking everywhere for a parts supplier for this door and have come up empty. It is a unique door being tapered and curved so it is going to be a Silverton specific part. Does anyone have any information on where or how I can possibly get one??? The Silverton parts store in NJ is not currently operating due to restructuring...I think...so that is not an option. Help!!! Very frustrating!

First of all Silverton was bought out under chapter 11 by Ebb Tide boats.All they bought was the tooling. I would really be surprised if they ever get up and running. If the panel is flat ( double doors at the transom) get yourself a piece of starboard and mount the latch and hinges. I think West Marine carries it or can get it. Search online for it also

Edit
www.silvertonboat.com/vbulletin/showthread.php?19157-Silverton

Maybe this forum can help you better
www.silvertonboat.com/vbulletin/forum.php

 

[r.j.dawg]

Re: Need Replacement Access Door For Silverton 402

If I remember, there is a bit of a curve at the top of the door. I would suggest getting one fabricated out of plexi glass or lexan. It comes in white and can be molded to match the contours of the stern.

 

[Thalasso]

Re: Need Replacement Access Door For Silverton 402

If I remember, there is a bit of a curve at the top of the door. I would suggest getting one fabricated out of plexi glass or lexan. It comes in white and can be molded to match the contours of the stern.

You can shape starboard also with enough heat to bend and not discolor

 

[coniglioco]

Re: Need Replacement Access Door For Silverton 402

You can shape starboard also with enough heat to bend and not discolor

All great stuff and thanks for the suggestions. Nothing on eBay and was trying to avoid having it made, but.....think that is what I will have to do. Thank you again!

 

[r.j.dawg]

Re: Need Replacement Access Door For Silverton 402

If you need a source check these guys out. I have been using them professionally for years and their work is top notch. They even have a 9' forming oven so replacement windshields are no problem.
http://www.ontarioplastics.ca/productLine/marine.php