duckmaster1
Cadet
- Joined
- Feb 4, 2010
- Messages
- 16
I have a 2004 G3 jon boat. I have a side console and bought the boat new in 2004.
My navigation lights do not work, I know I am getting power due to a volt meter and touching the pos. and the other 2 clips. I have a 3 prong single switch button for the front and rear lights, but they do not work.
Could it be both bulbs? There was a diod that was cliped with the 2 clips on the button. I thin on a single flip button, the middle is the positive, and the top and bottom are the other 2. Can anyone give me some directions on what may be going on with just that switch. I have enclosed a picture of the diod that was connected to the switch.Could the button be bad?
Any help would be great.
Thanks
My navigation lights do not work, I know I am getting power due to a volt meter and touching the pos. and the other 2 clips. I have a 3 prong single switch button for the front and rear lights, but they do not work.
Could it be both bulbs? There was a diod that was cliped with the 2 clips on the button. I thin on a single flip button, the middle is the positive, and the top and bottom are the other 2. Can anyone give me some directions on what may be going on with just that switch. I have enclosed a picture of the diod that was connected to the switch.Could the button be bad?
Any help would be great.
Thanks
