need to change impeller

[mrbill812]

I got my boat back with new gimbal,ujoints and bellows now I noticed that the impeller has never been changed (paint on bolts). I've done my homework, looks like a straight forward job except.... I'm going to need to change it out from the side and using a mirror. unless I can figure out how to remove the whole back seat of my glastron gx205!

soooo my question is, does anyone know the size of the 4 bolts on the pump case and the 2 bolts for the bracket? any and all wisdom would be appreciated.
mrbill

 

[Ciera2450]

Re: need to change impeller

Your specific motor would help.

 

[Don S]

Re: need to change impeller

http://forums.iboats.com/showthread.php?t=220416

 

[mrbill812]

Re: need to change impeller

sorry should have paid more attention. it's a 5.0 GI the pump is on the bottom front of the motor and I can't get at it from the front due to the back plate of the u shaped seat assembly, so I'm going to need to craw into the engine compartment and attack it from the side. I just figured if I know the bolt sizes that's one less thing to worry about.

thanks,
mrbill