Need wiring diagram for hooking up trim and tilt harness

[mirage5058]

I have a sylvian boat with 200hp evenrude trying to wire up tilt and trim picked up a three buttton three wire harness anyone have a pdf or diagram of how harness is supposed to be hooked up with relays,any help would be apreciated,have manual but doesnt give me correct info.

 

[redlinj]

Re: Need wiring diagram for hooking up trim and tilt harness

Hey, I'm in the same boat, no pun intended. I have a 21 ft Sylvan with a 1976 200hp evinrude. All the wires were cut by the po so I have no tnt. They do work. So, I need a harness,switches etc and directions on how to do this. I have 3 wires coming out of the pump motor(black, blue/white tracer and green/white tracer) and another 3(black, blue and green along with 2 small gauge black wires coming out of another cylindrical unit on the jackplate. I haven't had much luck in getting any info from this forum. Thought maybe you might have come up with something since your post was 3 yrs ago. Thanks, Jim

 

[redlinj]

Re: Need wiring diagram for hooking up trim and tilt harness

Whoops, I was wrong, your posted yesterday.