Needing Carburetor

[MeanyMan]

I have been looking all over the internet and unable to find a carburetor that I need for my Mercury motor. I seen many that are very much alike, but the numbers do not match. I am asking for help from anyone please. Here is my motor information. 2003 50 hp Mercury, 2 stroke, Ser# OT640348, Mod# 1050412AD (ELPTO) number on carb 3301-824902-C. Other number on carb WME 2 XK. This is the middle carb. Really don't need a whole carb. I broke off the brass connector where the fuel lines connect the top carb to middle carb and middle carb to bottom carb. I noticed that the brass connector is pressed in, not screwed in. Yes I did a big boo boo....LOL. As I stated above, I have seen many alike but numbers don't match. (Picture with Red background) The ones I have seen are for either 40, 60, 70 90 hp motors and I am not sure if they are interchangable as the jets might not match. I have attached a picture of the actual carb. (Picture with brown background) You can see the brass fitting on the side and you can also see where it broke off. Not sure if picture posted. PLEASE HELP!!!.....Thanks

 

[Maxz695]

Re: Needing Carburetor

have a look at these they have an XK on the carbs there off a 115 don,t know if the linkage is the same though WME 2 | eBay If it,s pressed in it should be able to be pulled out I would think. You may be able to tap into it get a bolt in there and pull it out or very carefully try to seperate it to relieve the pressure and it should come out easier. I looked ot some diagrams but don,t see the fitting that you can order. Maybe someone here can help with ideas for you

 

[MeanyMan]

Re: Needing Carburetor

Thanks Maxz695....yes I have seen those on ebay, but as I have stated not sure if it would work on my motor cause I think the jets would have to be changed. I'm sure that if I do find the part that I might be able to pull out the broken part. Hope someone on here has any idea where I can find it. Thanks for your input.