Nitro Switch Panel

[winterhawk78]

Can anyone help label these switches? The lettering has faded off of them. Does anyone have a pic of how they were labeled from factory?

 

[briangcc]

If it were me, I'd flip them on, one at a time and notate what they are. Then, using a label maker (Brother is the one I have - they have all kinds of tapes with clear backing and colors for text) I'd set about labeling them. Odds of finding someone with original lettering are probably slim at best.

 

[winterhawk78]

If it were me, I'd flip them on, one at a time and notate what they are. Then, using a label maker (Brother is the one I have - they have all kinds of tapes with clear backing and colors for text) I'd set about labeling them. Odds of finding someone with original lettering are probably slim at best.

thought about that myself but, not sure if a few of them work anymore and I dont know what they would go to. Just looking for a pic of it, maybe a wiring diagram.

 

[briangcc]

Wiring diagram doesn't exist....gonna have to trace the wires. Very few boats ever had wiring diagrams.

If you suspect the switch is bad, replace it OR test with a test light OR meter.

IF that's the only panel you have you have a horn (momentary sprung), Anchor/Nav light (this will be on/off/on), probably bilge (which may be on/off/auto) and most likely an accessory switch or two...possibly a live well. Only pressing them or tracing them will tell you the potential order.

 

[winterhawk78]

Wiring diagram doesn't exist....gonna have to trace the wires. Very few boats ever had wiring diagrams.

If you suspect the switch is bad, replace it OR test with a test light OR meter.

IF that's the only panel you have you have a horn (momentary sprung), Anchor/Nav light (this will be on/off/on), probably bilge (which may be on/off/auto) and most likely an accessory switch or two...possibly a live well. Only pressing them or tracing them will tell you the potential order.

Alright, sounds like a job for the fall. It's getting hot in Texas!
Thank you.