I just finished cleaning the carbs and replacing the coils on my mariner engine. It did not run constant before I changed the coils and now it does (I was told it was a weak coil so I replaced both)<br />I took it out on the water today since it seemed to run nice in my driveway with the muffs on. Turns out when I have the throttle all the way pinned, the motor only goes what feels like 1/4 throttle. I checked the linkage thinking that was the problem. everything bottoms out when the throttle is put all the way down. Is my carb not set proper? the engine would idle fine and run fine, just wouldn't produce any power. <br />Is my timing not advancing when it should? It did not sound like it was misfiring, just seemed like the gas was only pressed 1/4 way.