model# 906X92C , serial# 029153 1992 90hp
Battery charged and proper voltage, cranking RPM good. Black/yellow wire at switch box disconnected for testing. Flywheel magnets in position and none are loose, has a red stator installed. Checked resistance on green/white and white/green wires coming from under flywheel, aprox 575 ohms. There is a small electrical box that the green/white and white/green wires connect to (can't find it in a parts breakdown) with a blue wire on the other end that connects to the switchbox (power pack), no voltage on the blue wire at any time. The small electrical box seems to have a very small melted spot on the back where the coating has started to run down.
If any body has any suggestions I sure could use some help.
Thanks in advance for any help you might offer.
Battery charged and proper voltage, cranking RPM good. Black/yellow wire at switch box disconnected for testing. Flywheel magnets in position and none are loose, has a red stator installed. Checked resistance on green/white and white/green wires coming from under flywheel, aprox 575 ohms. There is a small electrical box that the green/white and white/green wires connect to (can't find it in a parts breakdown) with a blue wire on the other end that connects to the switchbox (power pack), no voltage on the blue wire at any time. The small electrical box seems to have a very small melted spot on the back where the coating has started to run down.
If any body has any suggestions I sure could use some help.
Thanks in advance for any help you might offer.