No trim power after new starter motor fit??!!

[Emeraldsnake]

Bayliner 2052LS Capri. 3.0L GM engine with a Mercruiser Alpha 1 gen 2 drive. My stern drive serial number is 0L406281, my transom number is 0L287387


Hi guys,
please help as Im at my witts end. I had starting problems, and after changing the slave solenoid, found that the problem was due to excessive wear to the brushes in the starter motor. I have now fitted a new starter motor and solenoid to go along with my new slave solenoid. She now fires up just fine. But now I have no trim! It worked fine before. I have cleaned all electrical connections. There is plenty of fluid in the trim motor oil tank etc. But now when I press the UP or DOWN or TRAILER buttons on the power lever, there is absolutely nothing. What has happened? Thanks for your help in advance....Its now British summer time and I was just on the verge of some decent trips.

 

[stonyloam]

See if you have voltage on the red trim solenoid wire, if not may have blown the trim motor fuse.

 

[Bt Doctur]

Or you never hooked the trim power back on the starter

 

[Emeraldsnake]

The trim motor fuse has broken. Where can I order a new one of these? It's a fairly long glass fuse that sits in the black twist apart casing on the trim motor as in the photo.

 

[Bondo]

The trim motor fuse has broken. Where can I order a new one of these? It's a fairly long glass fuse that sits in the black twist apart casing on the trim motor as in the photo.

Ayuh,.... Yer local auto parts store, or local marina,...

 

[Emeraldsnake]

Okay thanks. Didn't know if it was a specialist mercruiser only part. Sorry.