O-Ring Question

[Dave Abrahamson]

Is there a part number for the o-ring on the manual release screw for the tilt-trim unit on a 1983 Johnson 90 J90TLCTE, or if possible, can I just pick up an o-ring from the town hardware plunbing dept? Do any of the techs know the size I would need?<br /><br />Thanks for all the help, past and present. <br /><br />Dave

 

[OBJ]

Re: O-Ring Question

Don't know the size Dave but the PN is 202893. You could try the local plumb shop or maybe the auto store.

 

[Paul Moir]

Re: O-Ring Question

18-7168=202893=0.370" ID x.065" wide. Seems like 3/8 ID x 1/16" wide would do fine.

 

[rabidfish]

Re: O-Ring Question

most NAPA stores have that particular one...

 

[Dave Abrahamson]

Re: O-Ring Question

Like I said before, thanks a lot guys, you always come through for me.<br /><br />Dave