my last thread was about my top cylinder sparking but not really making a combustion, so today while i was looking at it, i say a wire underneath the flywheel that had been rubbing with something and was almost striped, so i replaced that wire and then when i fired it, the top cylinder now works great but now the bottom cylinder is not sparking
, nothing at all, no spark whatsoever, i tested it with another plug to the cylinder and nothing no spark, how can i test the coil? also i found out that my carbs are leaking from the bottom all three of them, and for some reason it spits fuel out to the the AIR INTAKE so much that it drips off of it, i run it for about 5 min and got enough to fill 2 bottle caps, any idea why it would do that...
, nothing at all, no spark whatsoever, i tested it with another plug to the cylinder and nothing no spark, how can i test the coil? also i found out that my carbs are leaking from the bottom all three of them, and for some reason it spits fuel out to the the AIR INTAKE so much that it drips off of it, i run it for about 5 min and got enough to fill 2 bottle caps, any idea why it would do that...