Old evinrude 25 hp electric start 1970-1980 how to start?

[Feltnerd]

Just got and old 25 hp electric start evinrude, early 80s late 70s I think, whats the best way to see if she runs?

 

[samo_ott]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

First post the model # so that we know the year.

Then, if it has not been run in awhile read the FAQ's under 'awakening a sleeping outboard'.

 

[Feltnerd]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

25202 Re 0005728

 

[tashasdaddy]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

1972, http://www.outboardbooks.com/index.cfm?fuseaction=models.main&year=1972&ID=57599

fuelil ratio is 50:1 TC-W3 outboard motor oil.

read the post in the top secret section at top of this forum

 

[Feltnerd]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

Could someone point me in the right direction of a carb rebuild kit and a new fuel pump for this motor.

 

[bullbat]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

any of your local boat dealers should have em in stock if not u can get em right here on iboats

 

[tashasdaddy]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

carb kit http://www.iboats.com/mall/partfind...gd_poid=109344&gd_row=34&**********=665017778

fuel pump, it will work nicely http://www.iboats.com/Sierra_18_735...z.36857--**********.665017778--view_id.174139

replace all you fuel lines with alcohol resistant lines.

 

[Feltnerd]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

Does anyone have a carb diagram for this motor, something that I could print out?

 

[jasper60103]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

Check out the Evinrude/Johnson parts website. They have blowup diagrams for various parts of your motor.

http://shop2.evinrude.com/ext/index.aspx?s1=58aa8b008ac0dfbe1b38b7840a26f056

 

[Feltnerd]

Re: Old evinrude 25 hp electric start 1970-1980 how to start?

Wiring harness diagram? Theres a few few wires just hanging on the motor and i dont know where they go or what they connect to.