Old Style CMC PT-130

[Desull]

Guys,
I need a little help. My boat has the old style CMC PT-130. The actuator is seperate from the black pump. I have a fluid leak and the unit won't raise the outboard. I want to try to fill it to find the leak. Is there a pressure release valvel or do I need to pull one of the hoses? The unit was purchased new (old stock) a couple years ago from an ebay seller. I had no idea it was no longer supported. Does anyone know where you can get parts or how to repair a leak on this unit? I didn't get any help from CMC.

 

[jbcurt00]

D
It posted, all 5 times. It's not you or your computer, it's a forum glitch if you're getting an error message that it didn't post...............

 

[Desull]

Whoops. I definitely thought i was doing something wrong. Thanks

 

[Bondo]

Guys,
I need a little help. My boat has the old style CMC PT-130. The actuator is seperate from the black pump. I have a fluid leak and the unit won't raise the outboard. I want to try to fill it to find the leak. Is there a pressure release valvel or do I need to pull one of the hoses? The unit was purchased new (old stock) a couple years ago from an ebay seller. I had no idea it was no longer supported. Does anyone know where you can get parts or how to repair a leak on this unit? I didn't get any help from CMC.

Ayuh,.... While I don't have any direct answers, while lookin' to see what yer workin' on,...

I found This, the installation, 'n service manual,....



Btw,.... If ya use yer Fresh Button after any forum actions that you think failed, ya might be surprised after ya Refresh that page,.....

 

[Desull]

Thanks Bondo. I ran across those manuals too but my unit is a different. It has a black pump and round actuator like the picture below. I have looked everywhere and there is no documentation on this unit. I am reluctant to take hoses of the pump and actuator for fear of making the problem worse.