omc cobra exhaust seals

[proshadetree]

Anyone know the part number or where I can get the exhaust seal that goes between the y pipe and the gimbal plate?Also need a transom seal.This is a 88 cobra with a 305 chevy,in a bayliner capri.Thanks in advance

 

[HT32BSX115]

Re: omc cobra exhaust seals

Anyone know the part number or where I can get the exhaust seal that goes between the y pipe and the gimbal plate?Also need a transom seal.This is a 88 cobra with a 305 chevy,in a bayliner capri.Thanks in advance

Howdy,


I am guessing you need #71 below?

Doug Russell might be one place to get it.

Cheers,


Rick

 

[proshadetree]

Re: omc cobra exhaust seals

Thats the one I have looked all over and keep seeing it but no part #.Thanks I was going nuts looking.

 

[Lodgepole]

Re: omc cobra exhaust seals

Part # is 0911831. You can go to bestboatparts.com and click on the big blue OMC. Then do it again on next screen. When 3rd screen comes in top left corner, where it says Evenrude, click and change to stern drive and click. Then follow instructions till you get your info put in and click on transom mount. This will bring up the exploded picture above in post #2 along with a parts list showing #71. I don't reccomend ordering from Best Boat Parts as I did. Got order acknowledgement PDQ bet never heard from them even after 3 E-mails, several unanswered phone calls and an unanswered letter. Marineengin.com probably can furnish as well as other sites.