kfa4303
Banned
- Joined
- Sep 17, 2010
- Messages
- 6,094
Re: OMC cooling question
I use these on all of my motors and install them inline between the fuel pump and the carb. It only cost about $2 and only takes about 2 min to install. It also lets you visually verify that fuel is being sent to the motor and that the pump is working. You can get them just about any where.
I use these on all of my motors and install them inline between the fuel pump and the carb. It only cost about $2 and only takes about 2 min to install. It also lets you visually verify that fuel is being sent to the motor and that the pump is working. You can get them just about any where.
