OMC Intake Manifold -14096244

[diobe]

Need the Following unit. Anyone know of a goo place to buy one?


Actually was given a Intake but after cleaning and refinioshing I realized it's no good for my application.

The one on my boat rusted/erroded thru to the base. (details in another thread)



Thanks,

 

[Bt Doctur]

Re: OMC Intake Manifold -14096244

I dont know what that number goes to but if you tell us what kind of motor and drive you have we might have an answer.

 

[diobe]

Re: OMC Intake Manifold -14096244

OMC 305 - 5.0 1988 (year is a gustimate)

4 Barrel Intake

 

[Gary H NC]

Re: OMC Intake Manifold -14096244

Check with Ebasicpower.com....

 

[Howard Sterndrive]

Re: OMC Intake Manifold -14096244

14096244 is the OMC number, but is also the Chevrolet part number if that helps in the search.
Auto wreckers might have them.

 

[dan t.]

Re: OMC Intake Manifold -14096244

any small block chev intake will work, look up the thread of March 2 2009 by sarantis entitled, has anybody modified an intake for 305 to 350 swap

 

[diobe]

Re: OMC Intake Manifold -14096244

I don't think any intake will work for replacing a 14096244.


Please see attached pick. The arrow in RED shows the needed angle for these bolts. I was already given a perfectly good intake but the angle was way off for these. Th 14096244 has a far "flatter" angle for these 4 bolts.


In addition the blue arrow is pointing to needed ount points not found on all 305 / 350 pre-vortec intaked.


here is a link to the need intake - but I'm not paying 629.95+ for an intake.

http://marineengineparts.com/shopsite_sc/store/html/page106.html


If someone knows of a web link to a reasonaable OEM or after market replacent that will work - it would be greatly appreciated.


I had one sourced yesterday for $80 but the seller decided a day later that he would not ship and instead sell locally.

 

[dan t.]

Re: OMC Intake Manifold -14096244

as I said look up the thread by S arantis, in it I explain how to adapt an older style intake to a newer motor, sorry I dont know how to post a link to an 0ld thread,it works I have an intake from a 1966 327 on a 1992 motor

 

[diobe]

Re: OMC Intake Manifold -14096244

I tried to modify a pre 1987 manifold but with the ammount of material I had to remove to get the bolts to line up made me feel unsre of the seal...

In any case I got the correct casting, used but in good condition - from a guy in Arizona. Shipping and manifold came to about $300 cdn.

Installed on my boat a few weeks back and very happy so far - about 5 trips on the water.