Omc?

[Squadilizer]

What this?
Tried to upload pic. Even got an app to shrink the file size. Lame no photo. Useless

 

[GA_Boater]

What's lame is you didn't read this - NOTES: new forum members must make 3 posts to the forum before they can upload photos. iBoats will only upload JPEG, JPG, GIF & PNG files. Your file size must be below 700KB in order to upload it to the forum. Linked files (option #3) do not have a size restriction.

Which came from this - http://forums.iboats.com/forum/forum...pload-tutorial

Do not use Option 3 if you use Photobucket.

Until you can add a photo, what is written on motor and what color is it?

 

[Squadilizer]

No, did not read. Just diy my OMC 120 inboard. Not sure how old it is. Resigned to take out existing running motor and transmission, potiential carb issue, to another engine I was fortunate to locate. So the bellows is what I learned about today. Trying to find one before Monday. Fiberform 18'?
GM 4 cylinder block with dual single barrel carbs.
3937746 block cast, GM 11
Carter 1754? Carbs. Looking for rebuild kit.

Actually, do I need to remove the bellows or can they lift the motor out with it still seated? Thanks.

 

[Scott Danforth]

answered in your other post. BTW, stop creating multiple posts on the same topic. pull drive, pull boot ring, push boot in hole, undo 4 stringer mounts, pick, motor and intermediate housing out as whole unit.

the motor you have is a mid 70's OMC 120 (2.5 liter) with dual carbs

the only thing that will fit in an OMC stringer transom is an OMC stringer