Does anyone know what comes with mercury driveshaft for 200hp DFI Optimax, tore up the forward and pinion gear an when doing the replace I have the pain in tail lower unit where you have to remove the drive shaft to get the prop shaft out. when I removed it I saw the metal chunks from the forward and pinion gears got sucked up in the driveshaft receiver and shredded my tapered bearings and my bearing assembly roller. according to the parts catalog I can get the bearing assembly roller but the tapered bearing that directly attach (pressed on I assume) are not sold separately. before I spend $360 for a new drive shaft and another $40 for the roller bearing I wanted to check with you all to see what all comes with the drive shaft are the tapered bearings already pressed on is the bearing assembly roller included a well or can I actually find the tapered bearing somewhere (if so what's the part number mine has 2) and press them on myself. I really appreciate everyone's help and any knowledge you all can spare. Thanks.
