Grouchybear35
Seaman Apprentice
- Joined
- Sep 6, 2003
- Messages
- 30
With my OMC Cobra outdrive trimmed all the way up does the engine still recive the cooling water that it needs at idle in neutral? My starter solinoid went bad, so we where out in the boat leaving the engine running while we where anchored in a cove to relax. I trimmed the outdrive all the way up to be sure the prop was not turning because my kids where in the water etc. The engine ran like this for approxamitly 1/2 hour. When we pulled anchor and started out the engine temp seemed a little higher than normal but I never saw it go over 190 degrees. After this I could hear valve noise that I have never heard before. this seemed to go away and the motor seemed to run in its normal temp. range. I then noticed that when I went to WOT from low speed I could hear a leaking noise from the Left bank of the engine. Can some one clue me in to what I may have done to my precious 4.3 V6?