Parts and Manual for Sea King

[williemartin]

This looks like the place to get some information on a seaking. I just bought an old (year unkn) seaking by Montgomery wards 7.5. The tag reads:<br /><br />MANUFACTURED BY<br />CLINTON ENGINES CORP<br />MAQUOKETA, IOWA<br />MODEL NO. K7514106 A<br />SERIAL NO. 1194529\TYPE NO. XTV 50475 A<br /><br />I got the motor running, she is going to need a good cleaning. I don't get any power to the prop. Soooo, I did what any other guy with tools and time would and took the lower unit off. I found a cast piece that engages the lower portion with the upper. I'll need that, as well as a manual. I think that I'm in deep enough with out some good guidance. If anyone can direct me to a source for parts and manuals, I’d say good things about them behind their back.

 

[steelespike]

Re: Parts and Manual for Sea King

The part you need may be hard to find.<br /> Clinton has been out of business for some time.<br /> They are supposed to have parts at this number.<br /> 563-652-2411.You could check ebay for parts , parts motors and manuals.They may have a manual right here too.<br /> There are generic manuals that cover many brands<br />of motors in one manual.I have 2 I use, one for 30<br />and above and one for below 30.

 

[rickdb1boat]

Re: Parts and Manual for Sea King

Maybe Here:<br /><br /> web page

 

[mfbear]

Re: Parts and Manual for Sea King

I was just wondering how you got the lower end off? I have a K900 that I think is the same except for the hp I have not figured out how to drop lower unit, it looks like I have to pull the powerhead first. Any help would be appreciated. <br />Thanks,<br />mfbear<br />lrfos@yahoo.com