Photos needed badly! Starcraft Medalist late 80's

bmwsalesman

Recruit
Joined
Jul 26, 2010
Messages
3
I bought an '87 Medalist 16' inboard 4 cylinder that had been treated very badly. Both back seats, the bases they sat on, and engine cover (base and hinged cover) are gone. I need photos of the whole rear setup, so I can see how the rear seat supports are built, how the top and bottom halves of the engine cover are built, and so on. Trying to put it all back as close to original as possible.
Any help will be greatly appreciated.

Thank you,
Jason
 

thesignguy

Seaman
Joined
Feb 21, 2011
Messages
73
Re: Photos needed badly! Starcraft Medalist late 80's

IMG00473.jpgHey bmw, we have the Medalist 1600 (outboard engine). I've posted a few pics for you to look at and hope it helps your restoration project. I just started to tear oout the floor in ours today because of the soft (and cracking) floors.
IMG00468.jpgIMG00467.jpg
 

Attachments

  • IMG00474.jpg
    IMG00474.jpg
    146.7 KB · Views: 1

bmwsalesman

Recruit
Joined
Jul 26, 2010
Messages
3
Re: Photos needed badly! Starcraft Medalist late 80's

Nice boat. And thanks for the pics. Yours is much in better shape than what I bought. All the flooring was rotten, and the stringers had turned into a mushy substance that once passed as wood. I even found a few termites living in the recesses under the flooring. The previous owner had done a partial floor replacement, and used wafer board, then left it outside in the rain uncovered. You can probably imagine how that turned out. But I got it cheap, and it's been fun for my five year old son to help Dad with the project. Hopefully we'll be on the water in a month or so.
 

ajgraz

Lieutenant Commander
Joined
Mar 1, 2010
Messages
1,858
Re: Photos needed badly! Starcraft Medalist late 80's

Out of curiosity, who so set on restoring close to original? Project boat that old you might as well just build it up however you like, IMO.
 
Top