marcuscarr
Cadet
- Joined
- Jul 19, 2005
- Messages
- 25
Here is what I have found about the motor and engine...
JCPenney model 1001
HP: 5.5TG
Year: 1975
Serial: 57-120068
On the engine tag...
tecumseh
T643-20B
7482130
I am looking for a service manual and parts list.
The main part I am looking for is a small geared piece at the engine side of the handle.
It appears that the handle turn, which is connected to a small gear, which it meshed with another small gear (the one I need). This gear has a metal rod through it that goes into the engine compartment. The metal rod has a small pin that must have passed through the gear at one time..so when the gear turns, the metal rod should turn. Part of the gear is worn out so the gear spins and the rod doesn't turn...hence, no throttle.
I also need to come up with a carb rebuild kit for that engine.
Any help would be much appreciated.
Thanks,
Marcus
JCPenney model 1001
HP: 5.5TG
Year: 1975
Serial: 57-120068
On the engine tag...
tecumseh
T643-20B
7482130
I am looking for a service manual and parts list.
The main part I am looking for is a small geared piece at the engine side of the handle.
It appears that the handle turn, which is connected to a small gear, which it meshed with another small gear (the one I need). This gear has a metal rod through it that goes into the engine compartment. The metal rod has a small pin that must have passed through the gear at one time..so when the gear turns, the metal rod should turn. Part of the gear is worn out so the gear spins and the rod doesn't turn...hence, no throttle.
I also need to come up with a carb rebuild kit for that engine.
Any help would be much appreciated.
Thanks,
Marcus