Pontoon Bimini Top Hardware

[cbanks]

I have a 1 1/4" square tube top that I need hardware for. This boat hasn't had a top on it yet and I found a cheap one at a yard sale but it did not come with the mounting hardware. Can someone tell me what/how the mounting brackets work? I am hoping to make some bracket out of some left over material from a scrapped boat.

 

[rrhodes]

Re: Pontoon Bimini Top Hardware

 

[cbanks]

Re: Pontoon Bimini Top Hardware

Rick,

Thanks for the Pic. My top is also the 1 1/4" tubing. So the fence tubing and the top tubing are both square 1 1/4" tubing. I need 3 brackets for each side but am not sure if these are all the same fitting.

 

[rrhodes]

Re: Pontoon Bimini Top Hardware

The one in the pic has a bolt but the other 2 use a pin so they can be removed easily. If you look at the top of the pick near the black plastic piece you will see a pin. The mount points on the rail are all the same. Pins are in the front and rear mount so the Bimini can lay flat.