phatmanmike
Captain
- Joined
- Oct 24, 2003
- Messages
- 3,869
how can i port my midesction/ exhaust housing on a 1991 omc 3.0L<br /><br />on my merc v6, it had 4 large holes on each side just at the bottom where it met the lower unit, but they were underneath a lil fin. my omc has no fins....<br /><br />can i just cut a set of holes on each side of the lower portion of the exhaust housing, or is there a better way?<br /><br />here are 2( bad) pics....<br /><br />do either of these look like they would work?<br /><br />or should i just do this:<br /> bobs machine exhaust housing <br /><br />
<br /><br />OR<br /><br />
